7 Country Clipper Mower Problems (+ How to Fix the Issues)

Lawnmower problems are expected. No brand is 100% perfect; they all have their problems, which can be fixed easily.

The Country Clipper was first introduced to the market in 1953. It is a lawnmower, known for its durability and versatility. 

With this in mind, it is no surprise that in 2012 a new version of this product was released in an attempt to gain a larger share in the ever-growing lawn mower market. 

Although the newest version of this product was created with good intentions, there have been many complaints from potential customers about various problems associated with this mower. 

In fact, some say that they would go as far as returning their Country Clipper altogether because of these issues.

country clipper mower

What Are These Country Clipper Mower Problems? 

The Country Clipper mower is a well-known garden lawn mower that has been in use for decades. With many different attachments, its compatibility with other tools makes it even more versatile. 

However, like all mechanical devices, the Country Clipper sometimes malfunctions or breaks down. Here are some problems and what you can do about them.

1. The Blades Will Not Rotate.

One common problem with the Country Clipper is that the blades will not rotate. This could be due to a number of reasons, such as a faulty motor or a misaligned blade. In most cases, it is easy to fix this problem by yourself. 

Solution

Simply check the motor and blade for any dirt or debris that may be causing the obstruction and clean them off. If the problem persists, you may need to replace the motor or blade.

2. The Engine Will Not Start.

Another common problem with the Country Clipper is that the engine will not start. This could be due to a number of reasons, such as an obstructed gas line, a dirty carburetor, or other problems. 

Solution

The first step in fixing this problem is to ensure that there are no obstructions to the fuel flow. Also, check if the spark plug is working properly. If the Country Clipper still does not start after these steps, you may have to clean the carburetor or replace it.

3. The Engine Will Not Shut Down.

A common problem with the Country Clipper is that once you start the engine, it will not turn off until you disconnect the spark plug wire from the spark plug. This occurs due to an obstructed ignition switch or other problems within the wiring of the mower.

Solution

One possible solution to this problem is to clean the ignition switch and wiring of all dirt or debris that may be causing an obstruction. If this does not work, you may need to replace the ignition switch.

4. The Blades Will Not Disengage.

Another common problem with the Country Clipper is that the blade will not disengage. This issue may be due to a number of problems, such as a faulty solenoid or an obstructed blade.

Solution

In most cases, if the problem is caused by something small like grass clippings, simply clean out the blocking object. If not, you may need to replace the solenoid or switch it off and on again.

5. The Mower Bounces And Is Hard To Steer.

A common problem with the Country Clipper is that it can be quite difficult to steer, especially on uneven ground. This may be due to a number of problems, such as a misaligned blade or worn-out wheels.

Solution

In most cases, this problem can be easily fixed by adjusting the blade or by replacing the worn-out wheels.

6. The Mower Leaves Tracks On The Lawn.

Another common problem with the Country Clipper is that it can leave tracks on the lawn, which can be quite unsightly. This may be due to a number of problems, such as worn-out wheels or misaligned blades. 

Solution

In most cases, this problem can be quickly fixed by replacing worn-out wheels. If not, you may need to readjust the height of the blade to reduce its contact with the ground.

7. The Plastic Housing Is Cracked Or Missing Pieces.

One common problem with the Country Clipper is that the plastic housing can crack or break, exposing the inner workings of the mower. This can be dangerous for both you and the mower.

Solution

One possible solution to this problem is to replace the entire housing. However, depending on how bad the damage is, you may only need to replace certain parts of the housing.

Country Clipper did not include a list of repairs for this problem. The only solution is to replace the entire housing or take it to an authorized service center working with Country Clipper.

How To Avoid Country Clipper Mower Problems

1. Replacing blades

The number one problem with CoClippers is worn-out blades. The blade geometry guides the grass clippings to the center of the blade for cutting. 

When you install a new blade, make sure it’s installed properly (the blade should be at about 10°-15° angle).

2. Blade Sharpness

Blades should always be kept sharp and level on both sides of the mower, the #1 reason for mower problems, especially when cutting tall or wet grass. Use a manual lawn mower blade sharpener. 

If your mower doesn’t have one built-in, get yourself an aftermarket add-on model like [link goes here]. A dull blade will crush rather than cut grass and lead to clogging. 

A sharp blade will result in a cleaner cut and less strain on the engine, which will increase the life of both mower and engine.

3. No-load RPMs

RPMs should be kept up at high speeds when mowing tall grass or wet turf, otherwise, you’ll get browning (turning little circles). You can verify proper RPMs with a tachometer, which is basically just an electronic strobe light that flashes with each rotation of the blade. 

If you don’t have one on hand, try opening your door windows while cutting high grass to check RPMs while going at full speed. RPM adjustment is adjustable by turning the belt tensioner on CoClipper models via a hex key.

4. Engine Throttle

Make sure you have the throttle set to full when cutting tall or wet grass and that you’re using fresh fuel. If the throttle is too low, blades will not spin fast enough and this will cause browning (turning little circles).

5. Fuel Levels

Always keep your fuel levels topped off to avoid fuel starvation and subsequent engine problems. Low fuel levels can also create a vacuum in the tank, which can suck dirt and debris into the carburetor and clog the fuel lines.

6. Clean Air Filter

Your air filter should be clean and dry for proper airflow; if it’s dirty or wet, replace it with a new one. A dirty air filter will restrict airflow and cause the engine to run hotter and faster, which will decrease the life of both mower and engine.

7. Mower Height

Set your blades to the correct height for the type of grass you’re cutting. Cutting at the wrong height will not only damage the grass. They also can cause excessive wear on the blades and other parts of the mower.

8. Sharp Edges

Watch out for any sharp edges on rocks, tree stumps, etc., that could potentially damage the blade or other parts of the mower.

9. Clean Underneath Mower

Clean any built-up grass or debris from under the deck after each use; this will help prevent rusting and premature wear.

10. Applying a Decalcifying Agent

Once a year, apply a decalcifying agent to the blade and other metal parts of the mower. This will remove any built-up lime deposits and corrosion, which will help to keep everything running smoothly.

11. Read the instruction manual.

This is probably the most important thing you can do to avoid problems with your Country Clipper mower. The instruction manual will tell you how to properly assemble and operate your mower, as well as how to maintain it.

12. Check the oil level before each use.

Make sure the oil level is correct before starting your mower. If it’s not, this could cause damage to the engine.

13. Clean the blades regularly.

Clean the blades at least once a season (more often if you’re mowing a lot of grass). A build-up of dirt and debris on the blades can cause them to wear down more quickly and may also affect the quality of the cut.

14. Be careful when mowing near trees, fences, and other obstacles.

If you’re not careful, you could damage your mower or even yourself by running into these obstacles. Always be aware of your surroundings and take it slow when maneuvering around them.

15. Mow in the right direction.

Mow in the direction of the grain – that is, with the blades running parallel to the ground – for a clean, even cut. If you mow in the opposite direction, you could damage your lawnmower.

16. Check the grass catcher bag regularly.

Make sure you empty the grass catcher bag when it’s no longer full, or this could cause damage to your mower’s engine. Also make sure that there aren’t any holes in the bag – if there are, they’ll need to be repaired before using again.

17. Stop using your mower if it starts making strange noises or smells odd during use.

This may be a sign that something’s wrong with your mower and needs to be fixed right away to prevent further problems from occurring later on down the road. 

If you continue to use these types of models over an extended period of time, they are more likely to break or malfunction.

18. Try not to push the limits too much with your mower.

When you use a riding lawnmower for an extended period of time, it’s more likely to break down later on down the road. This is because pushing your mower constantly can damage certain components that could cause problems later on. 

You should also try not to constantly let your mower run while you’re doing other things around the yard (such as pulling out weeds). 

These activities put unnecessary pressure on parts of your mower and could cause them to wear down faster than if you were just operating it normally.

19. Have regular maintenance done by a professional mechanic or at least familiarize yourself with how to do it yourself.

This will help keep your mower running in top condition and prevent any major problems from happening down the road. 

It’s also a good idea to perform some basic maintenance tasks on your own (such as checking the oil level and cleaning the blades) on a regular basis, so you’re familiar with how to take care of your mower.

Conclusion

Even though the Country Clipper mower is a great lawnmower, it can have its problems.

Some of these problems include the engine dying while in use, the blades not cutting properly, and the deck rusting.

Despite these problems, the Country Clipper mower is still a top choice for a lawnmower. It is durable, easy to operate, and has a long life span.

If you do experience any of the aforementioned problems with your Country Clipper mower, don’t hesitate to contact customer service. They will be more than happy to help you resolve the issue.