Bear Paw Succulent Propagation (Here’s how to do it)

This is your ultimate guide to propagating Bear Paw succulent plants.

bear paw propagation guide

To reproduce your Bear paw succulent, you can use stem cuttings or seeds.

If you are propagating a new plant, use seeds, which should be planted in the fall in well-draining soil.

You can either plant the seeds outdoors in a USDA hardiness zone 9a or indoors under a grow light.

For both methods, the plant must be kept moist, but not watered heavily.

Read Also:- Do Deer Eat Zinnia? (No, here’s why)

Growing Bear Paw Succulent at Home

If you’re growing this plant as a houseplant, you’ll want to grow it in a greenhouse, but if you don’t have a greenhouse, you can still grow it outdoors under a cloth. Just bring it indoors when the weather turns cold and rainy.

This particular type of succulent is delicate, so you need to handle it with care. Don’t touch the leaves directly with the soil, as this may cause the leaves to fall off.

Read Also:- Do Deer Eat Bee Balm? (Is It Deer-Repellent)?

Propagating Bear Paw Succulent with Cuttings

When you propagate Bear paw succulent by using stem cuttings, it is best to use the most recent leaf. Cut the bear paw plant so that the leaf is large enough to make cuts.

Wait a few days before planting the cuttings, as they may develop callouses and need some time to heal. After planting the cutting, it is advisable to replant it in a well-drained pot.

Keep in mind that propagating via leaf cuttings is less successful. To start, twist the leaves until they detach from the mother plant.

After a couple of days, the cut should be callous. Then, place the cutting on a sharp drainage substrate.

After a few days, it should have tiny roots. Sowing a leaf cutting from a bear paw succulent is an excellent option if you want to propagate a large amount of them.

There are many ways viable ways to propagate the Bear paw succulent. I prefer to use cuttings.

Ways to Care For Bear Paw Succulents Indoors

If you want to grow your Bear Paw succulent indoors, there are a few things you should know. This small shrub needs bright light and should be placed next to a south-facing window. 

During the winter, you should move it to a shadier area if it is not exposed to direct sunlight. 

Besides that, it doesn’t require fertilizing. In fact, during the winter, you should give it as much sunlight as possible, at least six hours per day.

Read Also:- Are Spider Plants Poisonous To Cats? (No, here’s why)

Watering Bear Paw Succulents

The best way to water your Bear’s Paw is not to over-water it, as this will make the plant brittle and vulnerable to over-watering. Instead, water the plant lightly, and less often than normal.

When you do over-water your Bear’s Paw, you’ll notice that it has yellow leaves, wrinkly stems, and black spots on its leaves. It is also important to keep it out of direct sunlight, as it can cause sunburn.

When growing a Bear’s Paw succulent, you need to avoid over-watering it. You should also avoid over-watering it, as this will result in leaf fall and poor growth.

To avoid over-watering, plant it in slightly sandy soil and avoid watering it for a few weeks. It is important to not water the bear paw succulent heavily. It is best to plant it in a well-drained pot, as it needs to have sufficient air circulation and a little bit of moisture.

Place Bear Paw Succulents in South-Facing Window 

During winter, place the bear paw succulent near a south-facing window. It will benefit from sunlight and moderate humidity.

It will also benefit from a UV grow light. As a desert-dwelling plant, the bear paw is sensitive to overwatering compared to most houseplants. It is especially susceptible to this problem during the winter season when the bear paw is dormant and cannot be planted in the ground.

Read Also: Succulent Plants: Growing and Caring for Succulent Plants for Beginners

How Tall Do Bear Paw Succulents Grow?

Despite its high-demanding nature, bear paw succulents are easy to grow indoors. The bear’s paw will grow to approximately 20 inches tall in a year.

Its teeth-shaped leaves and bell-shaped flowers, which are usually pink, orange-red, or light yellow, are also attractive to the eye.

The Bear’s solitary flower will not require much maintenance but should be kept out of the direct sunlight.

It is easy to grow bear paw succulents indoors. Its appearance is peculiar and can be a unique focal point in any room. It is a good choice for homes with a lot of sunlight.

As long as the bear paw succulent is kept moist, it will survive even in very dry conditions. While it requires only minimal care, the plant can thrive indoors. If you want to enjoy the enchanting bear paw succulent, make sure to follow these tips.

Bear paw succulent care indoors is as simple as following the same guidelines as those for other plants. You should place it in a sunny window in a warm area. You can also move it to a shady spot in your home.

Once it is established, water it once every few days. It will need a few hours of indirect sunlight to stay healthy. However, it will not tolerate overwatering, so you should keep it in a bright, shaded area with plenty of natural light.

Read Also: 20 Best Privacy Shrubs for Your Garden retreat today

Be Mindful of the Soil’s pH Value for Bear Paw Succulents

While bear paw succulent care indoors is fairly easy, it is still important to follow these tips and be aware of the proper pH level.

It needs a warm place with a south-facing window. You can also bring it outdoors during the summer by putting it in a south-facing window.

For optimal bear paw succulent care, you should select a place that gets six hours of direct sunlight each day.

It also needs a minimum of 6 hours of direct sunlight. Because of its sensitive roots, it needs to be watered carefully.

Its soil should be well-drained and contain enough holes to allow it to dry out quickly. If you are worried about overwatering, it will not grow properly.

Read Also:- Do Deer Eat Impatiens? (Yes, here’s why)

Propagate Bear Paw in a Well-Draining Pot

The cuttings should be large enough for you to make the necessary cuts. When the cuttings are fully healed, place them in a pot with sharp drainage and wait for a few days.

In two weeks, they should be showing tiny roots. If you have success with this method, it should be easy for you to replicate the bear paw.


Unlock the secrets of Bear Paw Succulent propagation with our comprehensive guide. Learn step-by-step techniques for successful propagation, from choosing the right cuttings to providing optimal care. Discover how to create a thriving succulent collection through simple and effective propagation methods. Elevate your gardening skills and cultivate a lush Bear Paw Succulent garden with Plant Gardener’s expert insights. Dive into the world of succulent propagation and watch your Bear Paw Succulent flourish with health and vibrancy. Explore the full guide at PlantGardener.

Read Also:- Do Deer Eat Sedum (Stonecrop)? (No, here’s why)


When replanting the cuttings, make sure you use well-draining soil and plant the Bear paw succulent in it.

It will grow much better and be healthier if you take good care of it.

Just make sure that it has plenty of sunlight to stay healthy.  

Read Also:- Do Deer Eat Marigolds? (No, see why)


To Plant a Garden is to Believe in Tomorrow!

Sign up for our newsletter and turn your thumb greener with each season. No spam, just blooms. Subscribe now and start nurturing nature's beauty with us!

You have Successfully Subscribed!